Segway I Series Spécifications télécharger pdf (Page 31)

troubleshooting and display icons

Problem Safety Shutdown while entering or leaving a store, library,

or other building.

Theft detection systems may interfere with Segway HT operation. Many

libraries, retail stores, and other buildings use theft detection systems to

detect protected items as they enter and exit a building. These systems are

usually situated at the building entrances and exits so that patrons must pass

through on their way in and out. These systems may not always be visible.

Some theft detection systems have caused the Segway HT (in Balance Mode)

to perform a Safety Shutdown.

1. Step off at least 5 feet (1.5 meters) away from theft detection systems and

proceed through the theft detection system in Power Assist Mode or with

the Segway HT powered off.

2. Once at least 5 feet (1.5 meters) away from the detectors, riders may return

to Balance Mode and step on.

Problem Pressing the Mode Button does not cause the Segway HT to

power down or change into Power Assist mode.

1. Check that your Mat is not sticking to the Platform (see page 41). If the Mat

is sticking, lift the Mat to release it, while being careful to hold onto your

Segway HT, and not move it forward or backward.

2. Replace the Mat on the Platform

3. Press or tap the Mode Button

4. If the Segway HT still will not power down or change into Power Assist

Mode, contact an Authorized Segway Dealer to arrange for service.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Pas de commentaire

Segway I Series Spécifications Page 31