Segway x2 SE Turf Manuel d'utilisateur Page 111

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 148
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 110
109
Install the i2 SE Tire/Wheel Assembly
Tools Required: 13 mm socket, torque wrench
To install the i2 SE Tire/Wheel assembly:
1. Make sure the Segway PT is unplugged and powered off.
2. Ensure the PT is on its side, and the Wheel mounting surfaces are
clean of debris.
3. Place the Tire/Wheel assembly over the three threaded posts.
4. Hold the Wheel to prevent it from rotating.
5. Install the three Wheel Nuts to the threaded posts and tighten to
30N-m(22ft-lbf).
6. Replace the Wheel Cap by aligning the three plastic fittings on the
underside of the Wheel Cap with the three holes in the Wheel.
7. Press down on the Wheel Cap until it snaps into place.
Wheel Cap
Figure 69: Install the Tire/Wheel Assembly
Vue de la page 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 147 148

Commentaires sur ces manuels

Pas de commentaire