Segway I Series Spécifications Page 17

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 16
17
how the Segway HT works
Safety Shutdown
If the Segway HT detects a fault in any of its redundant
subsystems, the Segway HT notifies you by
automatically reducing its speed, shaking its
Handlebar, making growling and beeping noises, and
flashing red in the Display. This is called Safety
Shutdown.
If a Safety Shutdown occurs:
1. Immediately come to a controlled stop.
2. Carefully step off one foot at a time.
3. Do not resume use of your Segway HT until the fault
condition is diagnosed and cleared.
Theft Detection Systems
Theft detection systems, such as the type used in some
libraries and retail stores, may interfere with
Segway HT operation. Some theft detection systems
cause the Segway HT to perform a Safety Shutdown. Do
not ride within 5 feet (1.5 meters) of any theft detection
system. See page 31 for more information.
Empty Battery Condition
The Segway HT will notify you of a pending empty
battery condition prior to initiating Safety Shutdown.
A red unhappy face icon will appear in the Display, the
Segway HT’s speed will be limited, and the Segway HT will
beep. In some cases, old, cold, heavily used, or poorly
maintained Battery Packs may develop a high resistance
condition, which could cause the Display to show the
pending empty battery condition even though the Battery
Packs were recently charged. Whenever you see the
pending empty battery condition icon in the Display, you
should come to a controlled stop and safely step off of the
Segway HT prior to commencement of the Safety
Shutdown. This icon will be shown in the Display:
Never restart and ride your Segway HT after it has
indicated an empty battery condition or performed
Safety Shutdown due to low battery. The Segway HT
may not have enough power to keep you balanced,
especially if you demand a lot of power at once. If you
restart and continue riding, you risk falling. Also, you
risk damaging your Battery Packs, resulting in reduced
Battery Pack life and capacity. Fully recharge your
Battery Packs within the recommended charging
temperature range prior to riding. If the condition
persists, contact an Authorized Segway Dealer.
Display
Icon
(red)
Definition
The system has detected a critical
error and is slowing to zero speed
before shutdown (full battery charge
level indicator shown).
User
Response
Come to a controlled stop, then
safely step off and discontinue
operation. You have approximately
10 seconds from the start of the
Safety Shutdown to come to a
controlled stop and safely step off.
Display
Icon
(red)
Definition
Pending empty battery condition
User
Response
Come to a controlled stop and safely
step off of the Segway HT prior to
commencement of Safety Shutdown
Vue de la page 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Commentaires sur ces manuels

Pas de commentaire