Segway I Series Spécifications télécharger pdf (Page 24)

battery packs

To Charge Your Battery Packs

In order to maintain the best performance from your

Segway HT Battery Packs, fully charge your Battery

Packs for at least twelve hours, once a month, or once

every twelve hours of operation— whichever comes

first. Make sure that your Battery Packs are within the

specified charging temperature range when charging.

Even if you do not intend to immediately use your new

Segway HT, you should still charge the Battery Packs

for at least twelve hours as soon as possible.

1. Make sure the Charge Port is dry. Do not insert the

plug if it is wet.

2. Plug one end of the Power Cord (provided with your

Segway HT) into the Charge Port in the Control

Shaft Base.

3. Plug the other end of the Power Cord into a

grounded AC outlet (100 V to 240 V; 50 Hz to 60 Hz).

The Power Cord should be properly grounded.

Remember to charge your Segway HT whenever it is

not in use.

You do not need to worry about overcharging, so you

should always plug your Segway HT into AC power

when it is not in use. Even if you will not be using your

Segway HT for an extended period of time, you should

leave it plugged into AC power. Otherwise, the Battery

Packs could fully discharge over time, causing them

permanent damage.

Do not store your Segway HT or Battery Packs for more

than one month without fully charging the Battery

Packs at least once every thirty days. This could cause

permanent damage to the Battery Packs.

Before Each Ride—Remember to Close

the Charge Port Cover

Close the Charge Port Cover except when you are

charging the Segway HT. Closing the Charge Port Cover

will prevent water, dirt, dust, and other contaminates

from entering through the Charge Port and causing

damage to your Segway HT.

Limit NiMH Battery Pack Discharge for

the First Five Uses

To maximize NiMH Battery Pack life and performance,

follow this procedure to charge and condition your new

NiMH Battery Packs before the first use and after the

first five uses:

1. As soon as possible and before your first use,

charge the Battery Packs for at least twelve hours.

2. Limit the duration of the first five uses of your

Segway HT so that you do not discharge the Battery

Packs below the charge level illustrated below. For

information about the battery charge level display,

see page 26.

3. After each of your first five uses, charge the Battery

Packs for at least eight hours.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Segway I Series Spécifications Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Scooters Segway I Series